With the advancement of science and technology and the development of the industry in recent years, the development prospects of engraving machines are also optimistic by many people. If you want to buy a woodworking engraving machine, you should choose an engraving machine with dust-proof and dust-removing devices. Because it can suck away a large amount of dust generated during engraving at any time during the engraving process.

 

Even so, there will still be a certain amount of dust in the air, so we recommend that operators wear protective glasses and dust masks during work to protect eyes and respiratory organs and prevent dust damage.

 

Furthermore, the vacuum cleaner plays an important protective role in the work process of the woodworking engraving machine, so we recommend that customers should equip the machine with a vacuum cleaner. On the one hand, it can maintain the sanitation of the surrounding environment, and on the other hand, it can better protect the woodworking engraving machine. The operator of the machine. The operator himself must also take appropriate protective measures. The installation of a vacuum device can not only extend the life of the engraving machine, but also save time for you to maintain the engraving machine.

 

 

Daily maintenance of dustproof device of woodworking engraving machine:

 

First, check every day to remove all kinds of chips and other dirt on the surface to prevent the accumulation of debris, check whether the running track meets the requirements of lubrication, and prevent damage caused by huge friction caused by insufficient lubricating oil. Look at the surface. Whether it is very smooth and whether there are scratches, as a basis for early detection, these problems should be repeated before get off work in the afternoon. These tasks are the focus of every day and I hope to attract everyone's attention.

 

Secondly, the content of the regular inspection is mainly the inspection of the dust cover of the organ of the engraving machine to prevent dust and abrasive particles from sticking to the surface of the cooling pipe. If these things exist, it will affect the service life of the lead screw and the accuracy of the work, resulting in product damage. If it is unqualified, if damage to the screw guard is found during the inspection, it should be repaired in time. When the damage is more serious, it should be replaced in time. After each work, drain the remaining water in the water tank and wipe it with a dry cloth  machines.

 

ACCTEK has professional after-sales technicians who can provide you with necessary assistance when you operate the machine. Including the basic training before using the machine, as well as the technical problems encountered during the operation, all are handed over to the ACCTEK technical team. ACCTEK's product videos can be viewed on Facebook and YouTube. Search for AccTek CNC on Facebook and AccTek China on Youtube. You can learn more about CNC knowledge.