Fiber laser cutting machine is a new type of laser cutting machine developed in recent years.It USES the fiber laser to output the high energy density laser beam and concentrates it on the processing material to achieve the effect of automatic cutting.Mainly used for carbon steel, stainless steel, silicon steel and other metal materials under 40 mm.Therefore, as a new laser cutting machine, compared with CO2 laser cutting machine, what are the advantages and disadvantages of fiber laser cutting machine?
 

1. Good beam quality: the smaller the cutting line is, the higher the processing efficiency is and the better the processing quality is;

2. Fast cutting speed: the optical fiber laser cutting machine is twice of the equal power CO2 laser cutting machine;

3. High stability: Wuhan Ruike fiber laser, stable performance, the service life of key components can reach 100000 hours;

4. Electro-optic conversion efficiency is very high.Optical fiber laser cutting machine is about 30%, three times of CO2 laser cutting machine, energy saving and environmental protection;

5. Low operating cost: the power consumption of the whole machine is only 20-30% of that of the same CO2 laser cutting machine;

6. Low maintenance cost: optical fiber transmission, no reflector;Basically free of maintenance, can save a lot of maintenance costs;

7. Simple operation: optical fiber transmission, no need to adjust the optical path;After a simple training can be used, very convenient.

 

Compared with CO2 laser cutting machine, the biggest disadvantage of fiber laser cutting machine is that it is expensive. The price of a basic 1530 fiber laser cutting machine is usually more than 17,000 US dollars, which is often 3-4 times that of a CO2 laser cutting machine of the same size. Because the fiber slit is very thin, the gas consumption is very large (especially nitrogen cutting), and there will also be a part of the cost. In addition, the fiber laser cutting machine is difficult to cut high reflection materials such as aluminum plate and copper plate, the cutting speed is not obvious, and the cutting thickness is difficult to exceed 30mm.

Even with the advantages and disadvantages of the optical fiber laser cutting machine, the advantages of the optical fiber laser cutting machine are greater than the general disadvantages. Just a few years ago, such achievements were made. The research and development of fiber laser technology still have broader space for development. I believe in the future, metal laser cutting machine will bring us more technological surprises and processing breakthroughs!

 

---

If you want fast and accurate cutting, then fiber optic laser cutting machine is essential. Optical fiber laser cutting machine can cut steel, brass, aluminum, etc., without fear of machine damage.

The new technology produces a laser beam that is transmitted to the laser cutting head. Lasers transmit the heat of cutting metal to cut sheet metal with unmatched precision and quality.

The CNC laser cutting machine has excellent cutting quality and cutting materials such as titanium, brass, mild steel, copper, aluminum, stainless steel, etc. In the operation of the fiber laser, you can see the beam through the collimating lens with the help of optical configuration, and through the lens formed metal. It gives the material the desired shape and ensures that the material is properly trimmed.

Fiber laser cutting machine uses metal plate to process advertising trademarks, high/low voltage electrical cabinets, mechanical parts, kitchen utensils and automobiles, etc., to carry out efficient etching of materials, which adds significance to the aesthetic design of materials.

In addition, the laser cutting machine is simple to operate.All you need to do is follow the three-step approach:

Create a page in the graphics software and import the designs that you want to sculp or create your own custom designs.

Set your laser machine to send your design to the laser.Now, move to the print driver, select the laser parameters to use, or select the default material Settings from the database.

Finally, select your document, place the material on the machine, close the machine door, and continue cutting.

---