In the process of laser cutting, the problem of not cutting through often occurs. So how can we solve this problem?

 

For the problem that the laser power drops and the current is small, we should replace the laser tube in time and use a larger voltage regulator to increase the laser current output and improve the output power.

It is necessary to reduce the cutting speed properly, clean the contaminated mirrors timely and reasonably, and replace the focusing lenses.

If the light path is not correct, you can readjust the light path and adjust the focal length until the laser makes a round spot on the paper.

When cutting copper and aluminum, it is better to polish the surface or apply light absorbing material in advance to deal with the problem of high reflection rate.

Clean the foreign matters in the nozzle regularly, increase the pressure of the auxiliary gas, and change the distilled water of the cooling system in time.

These measures can effectively solve the problem that the sample is not cut through, and hope to help you.

 

Any mechanical equipment will encounter some problems during long-term use. ACCTEK has professional after-sales technicians who can give you the necessary help when operating the machine. Including the basic training before using the machine and the technical problems encountered during the operation, let these all be handed over to the technical team of ACCTEK.

The ACCTEK's product videos can be seen on Facebook and YouTube. Search for AccTek CNC on Facebook and AccTek China on Youtube. You can learn more about CNC knowledge.