The normal operation of the machine is a necessary condition to ensure the completion of the work in the shop, so it is very important to protect the laser cutting machine from moisture. This post introduces some common dehumidification and moisture-proof methods. If your workshop has high humidity, you can solve them according to these tips.

 

(1) Activated carbon moistureproof and dehumidification

Activated carbon has many uses. It can not only dehumidify, but also purify the air and remove odors. It is a good dehumidification product, but this dehumidification method is only suitable for small spaces, such as the control cabinet of the cutting machine, electrical cabinets, can effectively absorb moisture, but also can effectively remove odor.

The use of activated carbon moistureproof in wet weather can reduce the environmental humidity in control cabinets and electrical cabinets and reduce the probability of equipment failure due to humidity.

(2) Quicklime dehumidification

According to the data, every 1 kg of quicklime can absorb about 0.3 kg of water in the air. Quicklime absorbs moisture very well. If the room is wet and the ground is condensed, quicklime can also be put into cloth bags and placed in the corners of the workshop to achieve the effect of rapid moisture removal and drying.

(3) Air conditioning dehumidification

In humid weather, the effect of air conditioning dehumidification is also very significant.

Turn on the air conditioner, adjust to the dehumidification function option, and then run the air conditioner normally. In this state, the air conditioner is equivalent to a dryer, which can reduce the indoor ambient humidity and effectively ensure that the indoor air humidity is not too large, which is very conducive to the stable operation of the equipment.

 

If water vapor appears outside the electrical cabinet, do not start the machine immediately. It is necessary to wipe the water vapor on the surface of the electric cabinet first, and then turn on the air conditioner (with dehumidification function) for half an hour, and then turn on the power of the equipment to observe to ensure the stable operation of the equipment.

 

In addition to the problems that need to be paid attention to in wet weather, regular inspections of the laser cutting machine should be done at ordinary times. Regularly check the drainage of air compressor, filter element, cold dryer and other components. Avoid the risk of contamination of cutting head lens and machine tool gas pipeline due to failure of air compressor drainage function.