Fiber laser cleaning machine 1000W for metal

Metal corrosion refers to the process of metal damage and deterioration caused by chemical reactions between metals and the environment. After the metal is rusted, the surface will gradually corrode, which will significantly reduce the strength, plasticity and toughness of the metal material, destroy the geometry of the metal workpiece, and shorten the service life of the equipment. Therefore, once the metal material is rusted, it should be cleaned even to avoid various problems due to corrosion.

 

Laser rust removal machine can solve the problems that traditional rust removal methods cannot solve. Even if it is a metal part of the opposite sex, the laser rust remover can perform the rust removal operation through precise positioning of the laser beam. That is to say, as long as the place where the laser can be irradiated, the rust, oil stain, paint layer or oxide layer on the surface can be effectively removed.

 

The laser rust remover is a handheld laser cleaning machine composed of a fiber laser generator, a laser descaling gun, and a laser cleaning system. It uses pulsed laser or continuous wave laser to irradiate the metal surface, and the pollution layer can instantly absorb the energy of the focused laser, so that the rust, paint or oil on the surface can be peeled off or evaporated instantly, and effective removal of coatings attached to metal surfaces. Laser rust removal will basically not damage the metal substrate. Laser rust removal machine is also known as laser rust removal tool, laser rust remover, and laser cleaning machine.

 

The laser rust removal machine transmits the laser beam generated by the laser generator to the laser rust removal gun through the laser cleaning system, and uses the laser rust removal gun to emit a laser beam to scan the metal surface for cleaning and rust removal. The laser rust removal gun adopts a handheld design, which is easy to use and can flexibly respond to various objects and angles. Its advantages are high precision, technical requirements for operators and low labor intensity.

 

Laser cleaning is a process that involves using a laser beam to remove rust, paint, oxides and other contaminants from metal surfaces. It is efficient and effective than other methods like scraping. No chemical cleaning industry, no consumables, safety and environmental protection. The professional laser cleaning system is stable and reliable, requires almost no maintenance, and has low operating costs.

 

When using the hand-held laser rust remover, make sure that the power socket is in good contact, and check that there is no dust inside and outside the protective lens of the laser rust remover. In addition, in order to maintain the stable cleaning effect of the machine for a long time, it is necessary to do daily maintenance work. This can effectively increase the service life of the laser rust remover and create greater benefits.