CNC wood router mainly consists of four parts.Although it may increase or decrease according to material requirements, these four items are common in all routers.
A. Computer systems and NUMERICAL control controllers
The CNC controller and the computer system together make up the brain of this machine.These two things together tell the drive system and the motor in which direction they should move, go far and cut.
When using this system, don't forget to give the design you need, because most designs start with a digital format.
To convert a 3D or 2D digital image to a tool path (called a G code), always use the work of a CAM package with a controller and system.In this way, the computer computes the commands provided by the operator into digital signals.These digital signals then rely on a CNC controller to convert them into different voltages and currents to control the mechanical drive system.
B. the spindle
This part of the job is to cut the material.Perhaps it will tend to mark the spindle as the actual standard wood router.
In most cases, these routers spindles are watts and units (which are their SI units) classified by their power class and horsepower.A spindle, usually 8,000 to 30,000 revolutions per minute.However, in metals where spindles operate between 2000 and 10,000 RPM, this situation may vary.
The spindle works on router bits, which rotate the tool at different speeds.The main purpose of the spindle design is to cut wood, plastic and other soft materials.
As far as we know, the spindle works mostly with the help of a NUMERICAL control controller, which is used to adjust the spindle's roundness per minute (RPM), which is usually positioned according to the machine tool's material and feed speed.
However, there are many ways to install spindles in a CNC controller.Depending on these methods, Settings can sometimes include the use of touch probes, automatic knife changers, and tool sensors.
C. Linear drive system
The system is responsible for the motion of the spindle on its axis.CNC linear drive system has a motor and linear bearing system.Some leadscrew assembly may also be part of it, which is essential, so keep in mind if it is not in your Settings.
However, the link between the CNC router's mechanical structure and the machine's digital system is the motor.The power of the motor comes from the CNC controller.The nc controller provides rotational energy for the screw assembly of the system.
For knowledge, it is important to note that there are two types of CNC router motors on the market.They are stepper motors and servo motors.
Stepper motors are cheaper.It provides good performance and reliability.The problem with this motor, however, is that it doesn't go into a closed-loop system.
At the same time, the servo motor enters the closed loop system.Therefore, it will send signals to the operator and controller after completing the specified tasks.These types of motors, or rather systems, are found in high-end models.
In addition, the motor controller is also different.You cannot have the same controller for a stepper motor or a servo motor.
D. cutting bed
This is where all the action is.There are many types of cutting bed, but the function of the cutting bed is the same regardless of the type.A cutting bed is a place where a piece of material is cut for stability and support.
As mentioned above, there are many different types of cutting beds to perform cutting work effectively.The most common ones are the T-slot cutter and the vacuum bench cutter.
The T-slot cutting bed is best suited for any part because it mainly works with clips and bolts to lay and keep it perfectly on the bed to cut it.The T slot cutting bed is more versatile and more reliable for clamping any cutting material.
However, vacuum bench cutting beds are often found in very high end models.For manufacturing companies that work day and night, mass production design works well.Regardless of the vacuum table, the cutting bed is limited to flat pieces, such as wood and sheet materials.The only thing that a vacuum bench cutting bed is better than a T slot cutting bed is in its efficiency and speed to complete a good polishing job.
Higher speed, smoother edges, first-class finishes and a range of identical products are just some of the features that carpenters are bound to find when using CNC routers.However, will some people salivate over the problem of the router's application?Where can they use it?There are several industries where you can test the versatility of this machine.
A. Symbol making:
A CNC router is the perfect longing for a signboard.The versatility of the CNC router allows manufacturers to effectively work in the 3D/V position for engraving, grooving, engraving, contour and engraving.
B. Furniture manufacturing:
Using a CNC router is the best choice you can make as a carpenter expert to open up a unique design in a large number of pieces of furniture.CNC router can produce all kinds of exquisite beds, chairs, Windows, stairs, office furniture and so on.
C. Cabinet making:
The
CNC router, thanks to its technology, helps woodworking create shelves, dads, side panels, custom doors and front drawers.
Perhaps, after reading all this, you will now be convinced that the CNC router is the best thing there is to have something carefully crafted.In addition, with its admirable technology, the machine is becoming a favorite among carpenters around the world.Therefore, if you are not going to waste your time, energy and materials, contact Omni CNC immediately so that you can get a great deal on all types of CNC routers.
CN
EN
RU
FR
