What should we pay attention to when using the engraving machine

    When we bought a wood carving machine, do not think everything is ok, in the use of the process should also pay attention to maintenance and maintenance, with the general application of carving machine, this kind of problem is also taken seriously, let us look at what the main problems

    1,The most important thing is to maintain a clean working environment, which can not only reduce the probability of failure, but also provide a relaxed mood.

    2,Be careful of electric shock. The interface of the woodworking engraving machine should not be touched casually.Do not work in dark, damp places. Do not work in flammable liquids and gases.

    3,Keep outsiders and children away from the workplace. Visitors not related to homework should be kept at a suitable distance.When machining, the operator's hand should be away from the machining spindle;When processing stops, cut off the power supply, prohibit outsiders, children touch at will.

    4,According to the reasonable working process allowed by the system, do not use the low-power spindle to do heavy work, do not use indiscriminate processing tools, before processing must be done to fix the material, do not use hands to fix.

    5,When working, do not wear loose clothes and jewelry, so as not to be involved in the woodworking carving machine, it is recommended to wear non-slip rubber shoes, long hair to wear a hat, when processing metal or debris materials, must wear goggles to protect the eyes

    6,Do not pull out the connecting cable or the power plug, the cable should be away from heat sources and inflammable and explosive items, while avoiding contact with sharp objects, refer to the maintenance procedures of the manual, timely lubrication, regular inspection and maintenance, to ensure the reliable use of the entire woodworking engraving machine performance.

    7,When changing the tool, cut off the power supply of the spindle motor; when changing the processing material, cut off the power supply of the numerical control equipment; before starting the machine, remove the wrench of the machining spindle; keep a sufficient distance in the processing process, keep your head clear; do not operate when tired.

    8,If do not use the engraving machine for a long period of time, regular weekly refueling idling, to ensure the flexibility of the transmission system, require engraving machine under 10 hours/day continuous operation, ensure the normal work of the cooling water clean and the water pump, water shortage phenomenon to appear water-cooled spindle motor, regular replacement of cooling water, in order to prevent the water temperature is too high, circulating water as much as possible, can change the large capacity water tank.

    The engraving machine needs to be maintained to operate efficiently for a long time。