Do you know what you should avoid when operating
CNC machine tools?
All tools are dangerous if not used properly.
Given that manufacturing companies adhere to several common practices to ensure the safety of machines, there are still many risks, the most obvious of which are that machines are as vulnerable to failure as any other machine.
Failure to develop safe working habits when manipulating tools can eventually lead to danger.It is often said that prevention is better than cure.
People who learn to operate a machine must learn safety precautions before using tools.Most accidents occur because of a failure to follow safe working habits.
To solve this problem, you should develop safe working techniques, carefully operate CNC machine tools, and make the machine run at the most efficient level.
We briefly look at some of the important tips you should combine to operate CNC machine tools effectively.
Important tips to be careful when operating a CNC router:
Using a bad bit, you carve the material with a bad bit, you have an accident.Imagine what it would be like.Risk can increase the chance of danger.Do not obtain moderate quality bits of all sizes for your CNC machine tools.
The primary goal should be to have cutters that can prevent risk and perform routing operations very safely.The handling of the tool before you start using CNC also determines your success or failure. For example, make sure the tool is in the right position before wiring or even before you start.
Blunt, cracked or chipped tools may increase the chance of damaging the quality of the carved product.Make sure the tool is sharp and crack-free.Not knowing how to cut brands, then you should try to use brands that are perhaps one of the most popular, or those that are most popular, and have the highest customer satisfaction.
The cleaning machine not only extends and protects the service life of CNC machine tools, but also produces high quality products.
Like not wearing safety glasses or earmuffs
Not wearing safety glasses can put your eyes at risk.Where debris is likely to fly around, it is highly recommended to cover your eyes with safety glasses.
Eye protection is the most important safety rule when you are using a CNC router.
No matter what amateur CNC router you have, or if you run an industrial CNC router, even if you are an experienced user, you should observe security measures when operating the machine to avoid short - or long-term damage.
In addition, ear protection is not a typical requirement, but hearing impairment has become a major problem in the current work environment.
To prevent vision and hearing loss, you should choose safety glasses that cover your head completely.
With a variety of safety glasses available in the supply system, you should utilize one that provides the best protection with side shields.
Don't think about policies and rules, think about your safety, because dangers aren't warned before they happen.A CNC machine operator must adhere to correct safety measures to help you withstand potential hazards.
Lack of safety measures
The
CNC machine accident is no joke.Safety around any type of machinery should always be a priority.Don't have long hair (tie it up for work), don't wear loose-fitting clothes (wear appropriate clothes), and shouldn't swing around.
Your body should be covered.You can wear full-sleeved shirts and long pants, as shorts and t-shirts can increase your chances of injury.Your clothes should fit well and remember not to wear loose or loose clothing.
Ensuring safety is always the most important rule when operating a CNC router.Also, make sure you really understand the preventive measures taken by the machine and work according to the environment.
Unfamiliar G- code /G programming language
If you are not familiar with the G-code/G-programming language then you should be familiar with the programming language used to derive most CNC router machines.
You should have the following knowledge of CAD and CAM software and perform operations accordingly.
G code is a basic language of NUMERICAL control programming, and is also a common language used by programmers to operate numerical control machine tools.The CAM program will generate G code from CAD drawings.It also has the ability to produce quickly on CNC machine tools.
CAD/CAM technology is used to design products and program manufacturing processes, especially CNC machining.CAM software USES model and component-generation tool paths created in CAD software to drive the machine that converts the design into physical parts.CAD/CAM software is mainly used for prototype and finished parts processing.
In addition, you should know the basics of the G code, all you need to do is use the G code to learn and find out the basics of
CNC router beginners.
Leave the machine unattended
Never leave a machine unattended.Turn it off before you leave here.If you are not sure if the tool is turned off, touch it and close it again.
CNC operators must have a wealth of knowledge to operate the tool.In addition, the operator must maintain the precision of the tool so that the material can be cut effectively.
Tool precision is one of the most important considerations in ensuring consistent tool performance.Blunt cuts produce heat and damage the material.
Each machine has a place to go home and come back before starting another cycle.How important it is for the operator to turn off the machine before leaving the room.Make sure you always allow the best CNC router to return home and shut it down before reaching any movable area.
CN
EN
RU
FR
