Fiber & CO2 Combo Laser Cutting Machine for Metal & Nonmetal

This CO2 & fiber combo laser cutting machine for metal and non-metal adopts double gantry structure and is equipped with two control systems. Among them, the fiber laser system is used for cutting metal materials, and the CO2 laser system is used for cutting and engraving non-metal materials.

Model:AKJ1530F-2
Category:Fiber Laser Cutting Machine
View: Times
Brand:ACCTEK
Rating:

9.8
/ 10
price:$15200-$35400/Set
Lead time:30-60 working days
Customized features:vailable

No	Description	Parameter
1	Model	AKJ1530F-2
2	Working area	1500*3000mm
3	Fiber laser generator	Raycus / IPG / Max
4	Fiber laser power	1500W / 2000W / 3000W
5	CO2 laser generator	Reci
6	Driving system	Taiwan Delta servo motors
7	Voltage	220V,50/60HZ

Machine features

This CO2 & fiber combo laser cutting machine for metal and non-metal adopts double gantry structure, and its advantage is that it can be equipped with two independent control systems, which control fiber laser and CO2 laser respectively.

The fiber laser system is used for cutting metal materials, and the CO2 laser system is used for cutting and engraving non-metal materials. One machine has more functions and is more cost-effective than buying two independent machines.

Au3tech Laser Head for Metal Cutting

A200M sheet metal laser cutting head was designed for flat cutting within 2000w by German brand A-cutter in 2018. Stable and reliable, high precision, good quality and long service life.

The fiber laser cutting head adopts automatic focusing method, which can not only save focusing time, but also avoid cutting errors caused by manual focusing. The fiber laser cutting system can quickly change different focal lengths to adapt to the processing of metal plates of various thicknesses.
Raycus Laser Generator for Metal Cutting

Raycus has an efficient and professional R&D and production team, which is the top quality in China. This series of lasers apply to many application scenarios, with a narrow seam of the cut sheet and bright section.
The fiber lasers have higher electro-optical conversion efficiency, higher and more stable optical quality, ensure more stable and more sophisticated cutting effect in thick sheet cutting.
Fiber laser cutting system is available in 1500W-3000W laser power. It can cut up to 16mm carbon steel and 8mm stainless steel. In addition to Raycus laser generators, there are also IPG, Max and other lasers to choose from.
Au3tech Controller for Metal Cutting

Based on AutoCAD kernel development, powerful CAM function.

Built-in rich fiber laser cutting process and parameters, highlighting the high-quality cutting effect.
Laser Head with Red Point for Non-metal

Cutting head always follows the material to keep the cutting point location unchanged.

Professionally used for engraving and cutting of non-metallic materials.
Reci CO2 Laser Tube for Non-metal

Compared with the laser tube of the same level, slim beam, high quality spot.

Installation of reinforcement stings, the laser tube is not easy to collide and cause damage when moving the machine.
RDC6445 Ruida Controller for Non-metal

Ruida control system supports USB cable controlled by computer and and also offline control system by just a U disk.

The controller has better resistance to high voltage and antistatic ability.
Taiwan Delta Servo Motor

Faster speed with signal feedback. Low heat radiation.

Run smoothly at ultra-low speed. Reduce the vibration, avoid oscillation.

Efficient torque enhancement.

Optional

More Powerful Raycus Laser
IPG Laser Generator
Raytools Cutting Head
CCD Camera

Applications

Fiber Laser Cutting System
It is widely used in the cutting of various metal materials, such as stainless steel, carbon steel, alloy steel, copper, brass, silicon steel, galvanized steel sheet, nickel titanium alloy, inconel, titanium alloy, etc.
It can be used for the processing of common metal objects in daily life such as advertising metal characters, stainless steel kitchen utensils, environmental protection equipment, mechanical hardware, metal decorations, etc.
CO2 Laser System
Widely used for engraving and cutting of various non-metallic materials, including acrylic, wood, MDF, plastic, leather, fabric, paper, etc.
It can be used in advertising industry, furniture industry, musical instrument manufacturing, clothing production, luggage making and other industrial fields.

Acctek's after-sales

1 to 3 years guarantee of the whole machine.
Main parts(excluding the consumables) shall be changed free of charge if there is any problem during the warranty period.
Lifetime maintenance free of charge.
Our staff can be sent to your company to install or adjust if necessary.
technical support online whole life