CO2 and fiber combined laser cutting machine

1	Working area	1300*2500mm
2	Control System	Au3tech
3	Fiber Laser Generator	Raycus / IPG / Max
4	Fiber Laser power	1500W / 2000W / 3000W
5	CO2 Laser power	150W (Reci W6 )
6	Transmission	All axis Taiwan TBI ball screw transmission
7	Motor	Taiwan Delta 750w servo motor
8	Max Cutting Speed	35m/min
9	Max speed	50m/min
10	Guide rail	Taiwan HIWIN linear guide rail 25mm
11	Min line width	0.1mm
12	Power Requirements	380V, 50/60Hz, 16A
13	Continuous Working Time	24Hours
14	Repeat positioning accuracy	±0.02mm
15	Dimensions	380018501300mm
16	Working voltage	220V single phase 50/60Hz

Machine features

The CO2 laser head is used for cutting non-metallic materials, and the fiber laser head is used for cutting metal.

There are more processing methods with one laser machine and more materials can be processed.

Raycus Laser Generator

Raycus has an efficient and professional R&D and production team.

The single module CW fiber laser series not only can meet diversified demands of customers to the greatest extent, but also provide personal customization service.

Now laser output connector is QBH, with multiple control modes.
RECI CO2 Laser Tube

Equipped with a W6 laser tube, slim beam, high quality spot. It can cut non-metal materials up to 20mm. It has long lifetime, stable cutting performance.

Installation of reinforcement stings, the laser tube is not easy to collide and cause damage when moving the machine.
Aviation Aluminum Gantry

It is manufactured with aerospace standards and formed by 4300 tons press extrusion molding.

After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries.
Taiwan Delta Servo Motor

Faster speed with signal feedback. Low heat radiation.

Run smoothly at ultra-low speed. Reduce the vibration, avoid oscillation.

Efficient torque enhancement.
Au3tech Laser Cutting Head

A200M sheet metal cutting head was designed for flat cutting within 2000W by German brand A-cutter in 2018.

Stable and reliable, high precision, good quality and long service life.
HIWIN Guide Rails

Rail works with slider, drive the machine move, with good bearing capacity.

Optional

More Powerful Raycus Laser
IPG Laser Generator
Computer

Applications

CO2 and fiber combined laser cutting machine AKJ1325F-2 fiber laser cutting machine is good at processing on common metal items in daily life such as advertising metal letter, kitchenware, environmental protection equipment.

Laser cutting machines are widely used in electronics, electrical, mechanical hardware, new energy lithium, packaging, solar, LED, automotive and other industries.

It is widely used in the cutting of various metal materials, such as stainless steel, carbon steel, alloy steel, copper, brass, silicon steel, galvanized steel sheet, nickel titanium alloy, inconel, titanium alloy, etc.

Acctek's after-sales

1 to 3 years guarantee of the whole machine.
Main parts(excluding the consumables) shall be changed free of charge if there is any problem during the warranty period.
Lifetime maintenance free of charge.
Our staff can be sent to your company to install or adjust if necessary.
technical support online whole life

Write a Review

Song Shanfeng

from

South Korea

After comparing several companies, I finally chose their home. The materials and craftsmanship are really good, the hand is very heavy, the cutting power is full, and the express packaging is also tight, great!

Philip

from

Russia

After comparing several companies, I finally chose their home. The materials and craftsmanship are really good, the hand is very heavy, the cutting power is full, and the express packaging is also tight, great!

CO2 and fiber combined laser cutting machine

Working principle and cutting technology classification of laser cutting machine

CO2 and fiber combined laser cutting machine in England

How much is a Laser Cutting Machine

Laser Cutting Machine 1325F-2 How to remove O2 alarm