The basis configuration of acctek cnc router machine

screw

It is divided into grinding screw and ball screw. All the ball screws used in our machine are C7.Can be changed to C3, C5 and so on according to customer requirements, price is another inquiry)

guide

It is divided into square and circular rails.The square rail has higher accuracy, good load-bearing capacity and can be filled with oil.At present we only use square rails, not round rails.

Commonly used brands: Taiwan HIWIN (Shanghai Silver), PMI(Yintai), T-WIN (Taiwen), Japan THK.

Commonly used diameter 20mm, 25mm, 30mm, and so on.
 

Gear and rack

It is divided into straight teeth and helical teeth. All helical teeth are used by our machine with high occlusion and precision.
 

The vacuum cleaner

Matching: dust bag + dust pipe + dust cover, in which the dust cover on the row knife can be automatically up and down, there is a cylinder, the need for air compressor
 

Vacuum pump

Vacuum pump: divided into water pump, air pump, no oil pump

Air pump is recommended or no pump is optional for customers
 

Table top classification:
T-slot, pure empty table, suction and clampable T-slot + vacuum table (usually divided into 2 zones, 4 zones, 6 zones, or even 8 zones, according to customer requirements), and cast iron table.

Vacuum valve: standard ball valve.Solenoid valve can be selected (price is another inquiry), solenoid valve control, the body without control valve.

Cutter holder, handle and cutting tool

Only the tool changing machine can use the tool handle and handle, other ordinary machines only use the tool holder, not the handle.The machine is standard equipped with 4 tool clips, diameter: 3.175mm, 4mm, 6mm, (7,10 or 12.7mm).
 

Shank: ISO and BT shanks

The inverter

Commonly used brands are Shanghai Fuling (Fuling) and Taiwan Delta (Delta), frequency converter function is used to adjust spindle speed.Select the power of the frequency converter according to the power of the spindle. The power of the frequency converter is usually greater than or equal to the power of the spindle. The greater the power, the greater the size of the frequency converter.

Change the knife:

The tool changing machine needs the assistance of air compressor to change the tool.There are two kinds: disc and straight line.

Straight row knives need to be reset once after each replacement of the handle, and then they can work. The disc does not need it, and the disc tool replacement has a higher efficiency.
 

Oiling system: 
it can be divided into manual and automatic. The manual one needs to press the handle several times to realize lubrication, and the automatic one can set the lubrication period without manual pressing.

Function: lubricate the guide rail and slider through the oil pipeline to ensure the normal operation of the machine, reduce rust and ensure normal transmission.

Limit switch: divided into soft limit (induction limit), hard limit and mechanical limit.

Function: prevent each axis of the machine from running out of the working range, limit its working distance, ensure the normal operation of the machine.
 

About the voltage

All machines can use 220V or 380V three-phase electricity.The voltage value is allowed to fluctuate up or down by 10%. For example, the customer voltage is 400V, and the machine is 380V.