High quality AKJ1390 CO2 laser engraving & cutting machine|ACCTEK

High quality AKJ1390 CO2 laser engraving & cutting machine

Updatetime: 2021-07-13 11:17View:

Parameters：

NO	Description	Parameter
1	Model	AKJ-1390
2	Laser medium	CO2
3	Working area	1300*900mm	1600*1000mm	600(L)*400mm(W)	600mm*900mm
4	Working table	Knife table/honeycomb table
5	Laser power	80W/90w/100w/130w/180w
6	Power Supply	220v/50HZ,110V/60HZ
7	Min line width	≤0.15mm
8	Position accuracy	0.01mm
9	Repetition accuracy	0.02mm
10	Cutting speed	150mm/s
11	Guide rail	Hiwin from Taiwan
12	Transmission method	Belt Transmission
13	Drive system	3phase Stepper motor and driver
14	Cooling system	Water-cooling
15	Control system	Ruida(USB interface)
16	Control software	RDCAM, Coreldraw, Photoshop, AutoCAD, Tajima
17	Graphic format support	PLT,DXF,BMP,JPG,AI,ect
18	Working environment	0-45℃
19	Operating Humidity	5-95%
20	Net weight	450kg
21	Gross weight	550kg
22	Package Dimension	194014301290mm
23	Cutting speed	0 - 20000mm/min
24	Engraving Speed	0 - 40000mm/min

Basic Features：

6442S Ruida controller

Ruida control system, USB offline. The controller has better resistance to high voltage and antistatic ability

Reci CO2 tube

Compared with the laser tube of the same level, it has high efficiency and stable quality, and its service life is 10000 hours

Laser head with red point

If material thickness more than 22mm, need add up and down table with auto focus

Mirror and lens

Dia 20mm, focus length 63.5mm CO2 znse laser focus lens and dia 25mm mirror

HIWIN Guide rails

Rail works with slider, drive the machine move, with good bearing capacity

Stepper motor

Faster speed with signal feedback. Low heat radiation. Run smoothly at ultra-low speed. Reduce the vibration, avoid oscillation. Efficient torque enhancement