ATC CNC Router with a cutting saw——AKM1530C

When processing small workpieces such as handicrafts or toys, an ordinary cnc router machines can meet the needs of engraving and cutting. However, for the furniture and door panel processing industries, the material area is large and the thickness is high. After carving the pattern on the plate, it is usually necessary to perform a large number of straight-line cuttings on the plate. At this time, a professional tool is needed to complete the cutting of the plate. Today ACCTEK introduces to you an auto tool changer cnc router machine with cutting saw-AKM1530C.
AKM1530C cnc router machine configuration:
1. 9.0KW ATC spindle + a cutting saw
The 9.0KW ATC spindle is used for engraving and cutting normal materials; in addition, it is equipped with a 250mm diameter cutting saw, which can cut panels with a maximum thickness of 120mm at high speed, which is very suitable for the processing needs of furniture panels and door panels.
2. Automatic tool change device
The automatic tool changer is divided into ATC linear tool changer and ATC carousel tool changer. The standard configuration is an ISO 30 tool holder, which can be with 20mm max.diameter tools. The  ATC linear tool changer is fixed at the tail of the machine. Each time the tool is changed, it is necessary to return to the tail from the working area to change the tool, perform tool setting and zeroing, and then perform work. Compared with manual tool change, it is more convenient and more efficient. Compared with ATC carousel tool changer, the price is cheaper; The ATC carousel tool changer is fixed on the side of the gantry and is always on the same horizontal line as the spindle, and the tool change does not require tool setting and zeroing, which is more efficient than the linear tool changer. You can choose a suitable tool changer according to actual work needs.
3. Taiwan's Syntec control system
Taiwan's Syntec control system is professionally applied to high-end cnc router machines, and its anti-interference ability and control accuracy are superior to other categories.
4. Taiwan Hiwin 25 raisl, helical gear an rack transmission
Low noise, stable operation; good meshing of helical gears, large overlap reduces the load of each pair of gears, and improves the load-carrying capacity of the gears.
5. Vacuum table and two 5.5KW vacuum pumps
The vacuum table is mainly used to draw the air between the plate and the worktable surface through a vacuum pump to form a negative pressure, so that the material is tightly adsorbed on the table, the plate fixing is more stable, and it saves a lot of time for manual fix the plate. The vacuum adsorption technology is applied to the woodworking cnc router to greatly improve the work efficiency. While using the vacuum table, it is necessary to configure two 5.5KW vacuum pumps to operate together. The work surface can be divided into 4-8 areas according to the size of the board, and each area is controlled by a switch. When the processing board is small, only one processing area can be activated to make the board adsorption better.
The saw blade on the AKM1530C cnc router machine can automatically rotate according to the processing program, and can cut the plate from multiple directions without manual switching, and the operation is simple and convenient. If your company is engaged in the production of furniture panels and door panels, then this atc cnc router with cutting saw will bring effective help to your production.
 
The above is the introduction of AKM1530C. If you need to buy a suitable cnc router machines, you can learn about the product's performance and price online; if you want to know the machine on the spot in the factory, you can also contact us, and you are welcome to visit the company.