A CNC router spindle is an electric spindle for high-speed routing, carving, drilling, punching and more machining methods. The spindle is the core component of the CNC router machine. Therefore, it is very necessary to perform routine maintenance on the spindle of the cnc router.

 

How to maintain the water-cooled spindle

1. Since the water-cooled spindle adopts water circulation cooling, it needs to be replaced frequently in order to ensure the cleanness of the cooling water. At the same time, pay attention to the temperature of the spindle during processing. If the temperature of the spindle rises, check whether the water circulation is normal. After the water temperature is too high, the cooling water should also be replaced in time.

2. Because the weather is cold in winter, in order to avoid damage to the water-cooled spindle, the cooling water should be treated in time after the cnc router machine is used to avoid freezing of the water pipe or water tank. Of course, you can also choose coolant instead of water, which is not easy to freeze and has a good cooling effect.

3. It is strictly prohibited to turn on the spindle motor without cooling water. Only in the premise of normal cooling, spindle motor can be in good working condition.

4. Frequently clean the water tank, pipes, inlet/outlet, and other elements through which the water passes to remove any blockages. If the pipe has a dead bend, resulting in water flow or dirt clogging the pipe, it will cause the spindle motor can not work properly, and will affect the processing effect.

 

The normal work of the CNC router machine is inseparable from the support of every component, so doing a good job of daily maintenance is an important step to ensure the machine processing efficiency and extend the machine's use time.