Requirements for the use environment of fiber laser cutting machine
23 Mar , 2022
Xiaoxi
404
In order to reduce the failure rate of fiber lasers, you need to provide a suitable temperature and humidity environment for the fiber laser cutting machine. The following are the environmental requirements for placing fiber lasers, which you can use as a reference.
The fiber laser is the core component of the fiber laser cutting machine, and it has a great impact on the use of the machine after a failure. One of the main reasons for fiber laser failure is condensation inside the laser. In order to reduce the failure rate of fiber lasers, you need to provide a suitable temperature and humidity environment for the
fiber laser cutting machine. The following are the environmental requirements for placing fiber lasers, which you can use as a reference.
It is recommended that users buy a thermometer and a hygrometer, and place them in the air-conditioned room of the fiber laser machine to monitor the temperature and humidity of the air-conditioned room.
When the laser low temperature water is set to 22°C, the laser ambient temperature (air-conditioned room temperature) should be below 26°C, and the relative humidity of the laser environment (air-conditioned room relative humidity) should be guaranteed to be below 75%.
If the relative humidity of the laser environment exceeds 75%, the ambient temperature of the laser should be adjusted below 24°C, otherwise there will be a risk of exposure inside the laser.
If the intersection of the laser ambient temperature value and the laser ambient relative humidity value is less than 22. There will be no result inside the laser. If it is higher than 22, there is a risk of condensation inside the laser. You can reduce the laser ambient temperature value and the relative humidity of the laser environment, or set the cooling and dehumidification function of the air conditioner. The ambient temperature of the laser should not exceed 26℃, while keeping the relative humidity of the environment less than 60%.
It is recommended that the operator of the
fiber laser cutting machine pay attention to the values of the thermometer and hygrometer, find problems in time, and prevent risks.