Investing in a CNC router machine in the manufacturing workshop can complete the production of workpieces more efficiently. But if a CNC machine is not properly maintained, it will experience wear and tear and damage to components over time. Any downtime caused by a machine failure will bring the shop to a standstill, which will affect your production schedule and waste a lot of time.

 

Proper maintenance of your CNC router machine can extend its life and maintain high accuracy at all times, avoiding paying for repairs or parts replacement due to machine failure. Here are some maintenance tips to help you maintain your CNC machine and keep it running smoothly from one project to the next.

 

Create a machine maintenance plan

Routine maintenance of a CNC engraving machine is pretty straightforward, but with other things going on in the shop, you may be prioritizing other things and skipping CNC machine maintenance. Having a machine maintenance plan and sticking to it closely can help combat this oversight. By planning a schedule, you can also easily remember when the machine was last serviced.

 

Monitoring machine lubrication

Only by regularly lubricating the guide rails and lead screws of CNC machine tools can they ensure their effective operation. You should also pay attention to whether your machine is consuming oil faster than it should, and if there is a problem, take immediate steps to correct it. ACCTKKCNC auto tool change CNC router machine is equipped with automatic lubricating oil device, it will automatically lubricate the guide rail and lead screw according to your settings, which is more convenient.

 

clean up the machine

After each use of the CNC router machine, you must not forget to clean it up. There may be dust on the plate on the transmission system, so you must pay attention to cleaning it up. Then we start to clean the worktable, which can be cleaned with a brush; note that it is best not to accumulate debris on the worktable to avoid deformation of the platform.

 

Maintenance of the machine spindle

The water-cooled spindle needs to ensure the cleanliness of the cooling water and the normal operation of the water pump. It is also necessary to replace the cooling water regularly to prevent the water temperature from being too high. If the working environment temperature is too low in winter, the cooling water needs to be replaced with antifreeze. For the air-cooled spindle, check the operation of the cooling fan on time. When the temperature of the spindle is too high or the fan fails, it should be stopped in time for maintenance.

 

All of these maintenance methods are designed to avoid downtime due to CNC router machine failure. Preventing problems in advance, rather than reacting to them after the fact, can dramatically improve your shop floor productivity.