Before using a laser welding machine, you need to verify several parameters. Here are some preparations and tips to ensure a successful soldering operation.

1. adjust energy

It is important to properly adjust the energy to adapt the power to the process. This will prevent energy waste.

2. Ensure correct beam diameter

Diameter affects weldability. ACCTEKLASER recommends that you choose a laser beam with a diameter between 0.2 and 2 mm.

3. Check the pulse frequency

A pulse frequency that is too high will result in a pulse energy that is too low, resulting in reduced or even inefficient welding.

4. Monitor the waveform of laser pulses

ACCTEKLASER recommends that you change the waveform according to the metal you are welding. If an inappropriate waveform is used, 60% to 98% of the laser energy will be lost and the welding operation will fail.

 

ACCTEK laser welding machines are on sale at reduced prices from January 15th to February 15th. Each laser welding machine is $500 off its original price. That is to say, the cheapest laser welding machine can be purchased for $6,900, and the lowest price is only available during the event. There are only five days left to buy the cheapest laser welding machine now, if you are choosing welding equipment, you can learn more on ACCTEK official website.