The laser cutting machine must be familiar to some business friends, because its laser cutting has no mold consumption, no need to repair the mold, and save the time for changing the mold. Thereby simplifying the processing procedures, saving processing costs, and reducing production costs.

 

High-energy, high-density controllable laser cutting does not need to contact the material for processing, the laser beam does not exert any force on the workpiece, the non-contact cutting tool is not affected by the hardness of the material to be cut, and the laser beam has strong controllability. Compared with other light sources, laser has the characteristics of good monochromaticity, good coherence, good directionality and high brightness.

 

1) Good monochromaticity. Generally, the light announced by the light source includes your wider wavelength range, that is, the width of the spectral line. For example, sunlight includes all visible light wavelengths.

The laser has a single wavelength, and the width of the Samantha is extremely narrow, usually in the range of hundreds of nanometers to a few microns. Compared with the general light source, the width of the general line is narrower by the order of the laser.

 

2) Good coherence Generally, the light announced by the light source is classified as incoherent light, no interference phenomenon occurs, and the laser has good coherence characteristics. When the laser beams are stacked together, the fluctuation of the gas is stable. For a long time, the phase relationship between the front and back of the light wave can be kept unchanged, which is different from any other light source.

 

3) Good directivity Generally, the light emitted by the light source is directed to the four directions, and there is no directivity, because the speed of light has a large divergence. The laser divergence angle is small, generally a few millimeters, and has good directivity. If the laser beam is directed to the moon, the diameter of the spot on the moon's surface does not exceed 2km, or even smaller.

 

4) High brightness The so-called brightness, the definition given in optics is the light power emitted by the light source in a unit solid angle in a certain direction on a unit area. The laser beam can pass through an optical system, such as an image lens, and focus on a small area with high brightness.

 

CO2 laser cutting machine has many advantages such as high engraving accuracy, no burrs, and can process any shape. It is widely used in clothing industry, shoe industry, wood carving industry. The quality is stable and the price is cheap.

 

Ruida control system supports USB line computer control, and also supports U disk offline control system. The controller has good anti-high voltage and anti-static ability

Compared with the laser tube of the same level, the beam is slender and the spot quality is high. Install reinforcing ribs, the laser tube is not easy to collide and cause damage when moving the machine.

45° rearview mirror adjustment device. Three-point dimming bolt makes dimming easier. Imported lens, adapt to various environments, high precision and fast speed.

Faster speed and signal feedback, low heat radiation, smooth operation at ultra-low speed. Reduce vibration, avoid oscillation, effective torque enhancement.

The cutting head always follows the material, keeping the position of the cutting point unchanged.
 

 

If you want to know more about laser cutting equipment, you can follow us, we will update relevant information about fiber laser cutting machines from time to time.